KTNNKG Wireless Smart Home Light Switch Kit,Lighting Control Apparatus
- KTNNKG wireless light switch is default on design - when power on , then light on(Launch Date: May 23, 2019).
- 2 tact transmitters control 1 switch - (Turn 1 gang into 2 gangs) press to turn on ,press to turn off,self-locking mode for both touch RF,support mutual control
- Support manual control - no need to take off the cover when you add more remote control,just press the button
- 433mhz, AC85-260v - Load of fluorescent/LED lamp:< 500W;Load of incandescent lamp:< 1000W
- No mutual interference - Even if your neighbor has the same transmitter as yours, he can't control your switch
Notice:
1.The relay switch is default on design.
- why we need "default on"?
- Sometime the remote is out of power,or we lost it , then you can still turn on the light with traditional switch.
2.The transmitters have been paired to the relay switch well , you can use the kit directly, no need to pair them .
3.Default self-lock working mode: press transmitter to turn on ,press again to turn off.
4.No mutual interference - Even if your neighbor has the same transmitter as yours, he can't control your switch.
5.This switch is 10A 110V, it can be used for many kinds of appliance , not only for light.
6.If you want to add more transmitters,or you want to reset the working mode, pls follow the pairing steps as follows.
How to clean code:
* Press the Paired Button on the board 8 times,light flash,cleaning code successfully.
How to set the working mode:
Power on the switch first, RED light on
* Jog-lock(Momentary):Press "pairing button" 4 times,Blue led blink,then press the transmitter button,blue led blink fast ,then off
* Self-locking:Press "pairing button" twice,Blue led flash,then press the transmitter button,blue led blink fast ,then off.
* Interlock:Press "pairing button" 3 times,Blue led flash ,then press A button of the transmitter,then B button,blue led blink fast ,then off.
Spec:
- Working mode:Jog-lock(Momentary)/ Self-locking/ Interlock
- Compatible with any lamps like halogen/incandescent/CFL/fluorescent/LED
- 433mhz, AC85-260V, it can be used all over the world.
- Load of fluorescent/LED lamp:< 500W
- Load of incandescent lamp:< 1000W
- Switch size: 90*40*20 (mm)
- Encrypted connection, no signal interferences between switches
- Distance:10-30 meters,can pass through wall
- Battery for transmitter : 27A 12V battery(included)
- TACT Touch Panel:LED Indicator
- Special for home lamps
